{
  "id": "h11-led-headlight-bulbs",
  "sku": "h11-led-headlight-bulbs",
  "title": "H11 LED Headlight Bulbs (2 Pack, Off-Road Use)",
  "slug": "h11-led-headlight-bulbs",
  "price": 99.99,
  "currency": "AUD",
  "availability": "in_stock",
  "category": "headlights",
  "category_label": "Headlights",
  "tags": [],
  "colors": [],
  "materials": [],
  "dimensions": null,
  "weight": "190 g",
  "images": [
    "https://myauto.net.au/dropship-images/headlights/h11-led-headlight-bulbs/main-h11-led-headlight-bulbs.jpg",
    "https://myauto.net.au/dropship-images/headlights/h11-led-headlight-bulbs/h11-led-headlight-bulbs-2.jpg"
  ],
  "description_short": "Sold for off-road, show and private property use. A pack of two plug-in H11, H8 and H9 fitting LED bulbs with an aluminium body, built-in cooling fan and IP67 dust and water rating.",
  "description": "The problem with the globe that came out of the box\n\nHalogen globes dim as they age. Not in a dramatic way, just a slow fade over a couple of years until one night you realise the light looks tired and yellow compared with the car beside you. Then one side blows, and you are standing in a dark driveway with a torch in your teeth trying to work out which globe type you actually need.\n\nThat is usually the moment people start looking at LED. The appeal is obvious. A cool white light instead of a dull amber one, no filament to shake loose on a corrugated track, and a part that fits the same socket the old globe came out of. This pack is two bulbs built for H11, H8 and H9 sockets, running at 12 volts and 40 watts each, with a 6500K colour temperature.\n\nBefore anything else, the legal part. In Australia, putting LED bulbs into a headlight housing that was designed for halogen globes is generally not permitted on public roads. This set is sold for off-road, show, workshop and private property use. If the vehicle is registered and driven on the road, this is not the part for the job, and an auto electrician is the right person to ask about what is.\n\nHow an LED conversion bulb actually works\n\nA halogen globe is a wire filament in a gas filled capsule. Pass current through it and it glows. Simple, cheap, and most of the energy ends up as heat rather than light.\n\nAn LED bulb is a different animal. Small semiconductor chips sit on a metal plate and produce light directly. This bulb uses double sided CSP chips, which means the light emitting surface runs on both faces of a flat carrier rather than on one side only. That arrangement exists to put the light where a filament used to sit.\n\nThe catch with LEDs is heat. Chips do not glow like a filament, but they still make heat at the junction, and heat is what shortens the life of any LED. If that heat has nowhere to go, the chip gets hot, output drops and the part ages faster. Which is why the body on these is aluminium with a high speed fan inside it. Metal pulls heat out of the chip area, the fan moves air across the metal, and the heat leaves the bulb. Passive designs use a braided tail or finned block instead. Fan cooled designs like this one are more compact behind the base, which matters when clearance is tight.\n\nThe IP67 rating covers dust and water. Headlight housings breathe. They warm up, cool down and draw damp air in through the vents, so a sealed bulb is not a luxury item. For anyone shopping for the best ip67 led headlight bulbs, that rating is the number to look for rather than vague wording about weather resistance.\n\nWho these suit\n\nThink about where the vehicle lives. A paddock ute that never leaves the farm, a rally or paddock basher, a show car that travels on a trailer, a workshop vehicle that moves between sheds, a 4WD used on private tracks. Those are the uses this pack is sold for.\n\nThey also suit people who keep a spare pair in the shed. Globes fail at inconvenient times, and a boxed pair sitting on a shelf is cheap insurance for an off-road machine.\n\nWhat this pack is not for is a registered car driven to work. No amount of good intention changes the rule, and a defect notice is a miserable way to learn it.\n\nChoosing the right bulb\n\nStart with the fitting. H11, H8 and H9 share a base shape, which is why one bulb covers all three. Check your existing globe or your owner's handbook and confirm which of those three you have. Fitment is by fitting type, not by vehicle model, so never assume a bulb fits because someone with a similar car said so.\n\nNext, measure clearance. This is the step most people skip and most people regret. Pop the dust cap off the back of the housing and look at how much room sits behind the globe. Fan cooled bulbs need space for the fan section, and some housings simply do not have it. If space is tight, a slimmer passive design may be the better search, and anyone hunting the best fan cooled led headlight bulbs should still check depth first.\n\nThen think about colour. 6500K reads as cool white. Some people love it, some find it stark compared with the warmer tone of a halogen globe. There is no right answer, only preference, and it is worth looking at both before you commit.\n\nFinally, check the electrical side. These run on 12 volts. A 24 volt system needs a different part. Each bulb pulls 40 watts, so a pair draws 80 watts, which is well within what a healthy headlight circuit handles.\n\nThe decoder question\n\nThis comes up constantly, so it is worth explaining properly.\n\nMany modern vehicles monitor the current flowing through each lighting circuit. If the draw drops below what the computer expects, it decides a globe has failed and puts a warning on the dash. An LED draws less than a halogen, so on those vehicles the warning appears even though the bulb is working fine. Some vehicles go further and pulse the circuit, which shows up as flicker.\n\nThe fix is a CANbus decoder or anti-flicker harness. It is a small inline module that makes the circuit look like a normal halogen load. It is not included with this pack, because most installs do not need one and the right type varies between vehicles. If you turn the lights on and see a warning or a flicker, that is the part to go looking for.\n\nFitting them without drama\n\nDisconnect the battery negative terminal first. It takes thirty seconds and removes any chance of a short while you are working.\n\nGet to the back of the headlight housing. Sometimes that means lifting a cover, sometimes it means shifting the airbox or pulling a wheel arch liner. Remove the dust cap, unplug the old globe, release the retaining clip or twist lock, and pull it out.\n\nHandle the new bulb by its metal base. Finger oil on a chip surface bakes on with heat. Seat the bulb, lock the retainer, and plug in the connector. The plug is non-polarity, so direction does not matter. Reconnect the battery and test both sides before you put the covers back.\n\nIf the dust cap will not sit flat because of the fan section, stop and reassess rather than forcing it. A cap that does not seal lets water into the housing, and that is a worse problem than a yellow globe.\n\nLooking after them\n\nLED bulbs ask very little. Keep the fan vents clear so air can move, which mostly means not packing insulation or loose foam around the back of the housing. Wipe dust off with a dry cloth. Skip the solvents near the lens area.\n\nWhen you service the vehicle, give the bulbs a gentle wiggle to check they are still locked in place. Vibration on rough ground works at everything eventually, and a loose bulb in a housing is an easy fix if you catch it early.\n\nThe short version\n\nThis is a two bulb H11 LED conversion kit that also covers H8 and H9 sockets. It runs on 12 volts at 40 watts per bulb, puts out a 6500K cool white light from double sided CSP chips, uses an aluminium body with a high speed fan, and carries an IP67 seal against dust and water. The driver is built in and the plug is non-polarity, so installation is usually quick.\n\nCheck your fitting type, measure the clearance behind the dust cap, and be aware that some vehicles need a CANbus decoder that is not included. And keep the legal point front of mind. This set is for off-road, show and private property use, not for use on public roads in headlights designed for halogen globes.",
  "llm_summary": "Each bulb runs on 12 volts, draws 40 watts and uses double sided CSP LED chips with a 6500 Kelvin cool white colour temperature. The lamp body is aluminium with a built-in high speed cooling fan, and the bulbs carry an IP67 dust and water rating. The driver is built in, so no external box or extra connector is required, and the plug is non-polarity. Total item weight is 190 g. Some vehicles may show a bulb warning or flicker and need a CANbus decoder, which is not included. Sold for off-road, show and private property use. Sold for off-road, show and private property use only; not for public roads in headlights designed for halogen globes.",
  "returnable": true,
  "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Australian Consumer Law apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
  "shipping_profile": "standard",
  "warranty": null,
  "brand": "Online Auto Company",
  "gtin": null,
  "mpn": null,
  "condition": "new",
  "url": "https://myauto.net.au/h11-led-headlight-bulbs/",
  "canonical_url": "https://myauto.net.au/h11-led-headlight-bulbs/",
  "json_url": "https://myauto.net.au/api/products/h11-led-headlight-bulbs.json",
  "updated_at": "2026-11-11",
  "compare_at_price": 119.99
}
