{
  "id": "h4-led-headlight-bulbs",
  "sku": "h4-led-headlight-bulbs",
  "title": "H4 LED Headlight Bulbs (2 Pack, Off-Road Use)",
  "slug": "h4-led-headlight-bulbs",
  "price": 119.99,
  "currency": "AUD",
  "availability": "in_stock",
  "category": "headlights",
  "category_label": "Headlights",
  "tags": [],
  "colors": [],
  "materials": [],
  "dimensions": null,
  "weight": "230 g",
  "images": [
    "https://myauto.net.au/dropship-images/headlights/h4-led-headlight-bulbs/main-h4-led-headlight-bulbs.jpg",
    "https://myauto.net.au/dropship-images/headlights/h4-led-headlight-bulbs/h4-led-headlight-bulbs-2.jpg",
    "https://myauto.net.au/dropship-images/headlights/h4-led-headlight-bulbs/h4-led-headlight-bulbs-3.jpg",
    "https://myauto.net.au/dropship-images/headlights/h4-led-headlight-bulbs/h4-led-headlight-bulbs-4.jpg"
  ],
  "description_short": "Sold for off-road, show and private property use. A pack of two all-in-one high and low beam LED bulbs with an aluminium alloy shell, built-in cooling fan, IP65 rating and a plug-in design that needs no external driver.",
  "description": "The problem with the old globe\n\nHalogen headlight globes have a habit of fading quietly. They do not usually die in one dramatic pop. They get a bit dimmer each season, the light goes slightly browner, and one day you are squinting at a dirt track wondering when the lights got so tired. Pull a three year old globe out and hold it next to a fresh one and the difference is usually obvious.\n\nThat slow fade is the reason so many people start looking at LED. The H4 fitting is one of the most common bases out there, used on everything from older sedans to bikes, tractors and farm utes, so there is no shortage of options. This set is a pair of H4 LED headlight bulbs rated at 12 volts, 26 watts each, with a 6500 Kelvin cool white output.\n\nOne thing to be clear about before anything else. This set is sold for off-road, show and private property use. In Australia, putting LED bulbs into a headlight housing that was designed around a halogen globe is generally not permitted on public roads. If the vehicle is registered and driven on the road, this is not the product for it. If it is a paddock ute, a trail bike, a work machine, a show car or a project that lives on private land, read on.\n\nHow an LED conversion bulb actually works\n\nA halogen globe makes light by heating a wire until it glows. An LED makes light by passing current through a semiconductor. The two behave very differently, and that difference drives most of the design choices you see in a conversion bulb.\n\nThe first difference is heat. A halogen globe throws its heat forward as infrared, out through the lens. An LED pushes its heat backwards into the base, which means something has to carry that heat away or the chips cook themselves. That is what the aluminium alloy shell and the built-in fan on this set are doing. The fan runs whenever the bulb is powered and keeps air moving across the body.\n\nThe second difference is current. An LED draws less current than the halogen globe it replaces. On a simple circuit nobody cares. On a vehicle that watches its headlight circuit for faults, that lower draw can read as a blown globe, which is where bulb warnings and flicker come from. Those vehicles may need a CANbus decoder or load resistors. They are not included here, and whether they fix a particular vehicle depends on how that vehicle is wired.\n\nThe third difference is packaging. Many older LED conversion sets used a separate driver box that had to be cable-tied somewhere behind the headlight. This set does not. Everything lives in the bulb body, and the plug is non-polarity, so it connects either way around without you having to flip it and try again.\n\nWho this set suits\n\nThe honest answer is anyone with an H4, 9003 or HB2 housing on a 12 volt system, working off public roads. That covers a surprisingly wide spread of machines.\n\nFarm and property vehicles are a big one. A ute that never leaves the gate, a tractor that works at dusk, a side-by-side on a large block. Those machines often still run original halogen globes that have been in there a decade.\n\nProject and show cars are another. If a car is being built up and only sees a trailer and a display field, the cool white of a 6500K bulb suits that look. The same goes for a bike that only runs on a closed circuit or private land.\n\nWho it does not suit is just as important. If your vehicle is registered and used on the road, stick with a quality halogen globe in a halogen housing. No amount of good intent changes the rules, and an off-road product used on a public road is a problem you do not need.\n\nChecking fitment before you buy\n\nFitment for this product is by fitting type only. That means the base and connector are H4, which is the same as 9003 and HB2. It does not mean it fits every vehicle with that base, because bases are only half the story.\n\nHere is what to check. First, confirm the globe you currently have is actually an H4. Pull it out and look at the base. H4 has three flat blades in a row and a round metal flange with three locating tabs. If it has two blades or a different flange, it is not H4.\n\nSecond, measure the clearance behind the headlight. LED bulbs with built-in fans are longer at the back than a halogen globe. This one is described as close in size to a halogen globe, which helps, but a tight rubber boot or a dust cap that sits right against the back of the housing can still cause trouble. Measure from the back of the housing to whatever sits behind it.\n\nThird, think about the dust cap itself. Some caps have a deep dome and some are almost flat. A flat one is the usual sticking point. If you need a deeper cap or an extension boot, work that out before the bulbs arrive rather than at eight o'clock on a Sunday night.\n\nFourth, consider your electrical system. These are 12 volt bulbs. A 24 volt machine needs different equipment.\n\nFitting them without drama\n\nMost H4 housings are straightforward. Switch everything off and let the old globe cool right down, because halogen globes stay hot for a surprisingly long time. Pop the dust cap, unplug the connector, release the wire clip or twist collar, and the old globe lifts out.\n\nHandle the new bulb by the base or the alloy shell. Keep fingers off the LED chips and the lens area. Line up the locating tabs, seat it properly, and make sure the retaining clip clicks home. A bulb that is not fully seated will sit at an angle and the light will go everywhere except where you want it.\n\nPlug the connector in. Because it is non-polarity, it does not matter which way it goes. Test both high and low beam before you put the cap back on, then refit the cap and check the seal all the way around. A headlight that fills with water is a bigger headache than a dim globe.\n\nIf a warning appears on the dash or the light flickers, that is the lower current draw being read as a fault. A decoder suited to your wiring is the usual answer, and it is not part of this kit.\n\nLooking after them\n\nThere is not much to it. Keep the fan vents clear, because the fan is the part doing the work. Dust, chaff and dead insects collect in there on farm machines in particular, and a blocked fan means a hotter bulb.\n\nWipe the shell with a dry cloth when the bulb is cool and off. Skip solvents. If you pull the bulb out for any reason, put the dust cap and grommet back properly, since the IP65 rating on the bulb does not help you if the housing is open to the weather.\n\nCheck the retaining clip now and then on anything that works rough ground. Vibration can walk a clip loose over time, and a bulb that moves in the housing is a bulb that will not aim where you set it.\n\nThe short version\n\nA pair of H4 LED headlight bulbs, 12 volts, 26 watts each, 6500 Kelvin cool white. Aluminium alloy shell, built-in fan, IP65 rated, no external driver, non-polarity plug. High and low beam in the one unit. Item weight 230 g.\n\nSold for off-road, show and private property use, not for use on public roads in headlights designed for halogen globes. Fitment is by base type, so check that you have an H4, 9003 or HB2 housing and measure the clearance behind it. Some vehicles will throw a bulb warning or flicker and may need a decoder, which is not included.\n\nIf the base matches, the space is there and the machine stays off public roads, this is a simple pair to fit and an easy change from a tired old globe.",
  "llm_summary": "A pack of two H4 LED headlight bulbs, also matching the 9003 and HB2 fitting names, with high beam and low beam combined in each bulb. Rated at 12 volts and 26 watts per bulb, which is 52 watts for the set, with a colour temperature of 6500 Kelvin. The shell is aluminium alloy with a built-in cooling fan, the assembly is IP65 rated against dust and water, and there is no external driver box. The plug is non-polarity. Item weight is 230 g. Sold for off-road, show and private property use, not for public road use in halogen headlight housings. Some vehicles may need a CANbus decoder or load resistors, not included. Sold for off-road, show and private property use only; not for public roads in headlights designed for halogen globes.",
  "returnable": true,
  "return_policy": "Change-of-mind returns accepted for 15 days from purchase under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The consumer guarantees of the Australian Consumer Law apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.",
  "shipping_profile": "standard",
  "warranty": null,
  "brand": "Online Auto Company",
  "gtin": null,
  "mpn": null,
  "condition": "new",
  "url": "https://myauto.net.au/h4-led-headlight-bulbs/",
  "canonical_url": "https://myauto.net.au/h4-led-headlight-bulbs/",
  "json_url": "https://myauto.net.au/api/products/h4-led-headlight-bulbs.json",
  "updated_at": "2026-11-11",
  "compare_at_price": 143.99
}
