Online Auto Company
Company
Shop By Category
T&Cs
Shop Online
  • Free delivery across Australia on orders over $100
  • Interior, exterior and roadside car accessories in one place
  • Dispatch within 2 working days, then delivery in up to 7 working days by tracked courier
  • Tracking number emailed as soon as your order ships

H4 LED Headlight Bulbs | H4 LED Bulb | H4 LED Conversion Kit

H4 LED Headlight Bulbs (2 Pack, Off-Road Use)

$119.99 $143.99 Save $24
  • Off-road and show use only
  • Two Bulb Set
  • Fan Cooled Shell
  • No External Driver

Price: $119.99 $143.99

  • Delivery time: up to 7 working days by tracked courier, after dispatch within 2 working days
  • Free delivery across Australia on orders $100+, otherwise a flat $25
  • Pay by card or PayPal, handled by the payment provider
  • 15 days to change your mind, plus your Australian Consumer Law guarantees
Product specifications
FittingH4 / 9003 / HB2
Light SourceLED
Voltage12 volts
Wattage26 watts per bulb (52 watts per set)
Colour Temperature6500 Kelvin
CoolingBuilt-in fan, aluminium alloy shell
Ingress RatingIP65
Pack Quantity2 bulbs
Item Weight230 g
Weight230 g
Shipping & returns

Tracked delivery anywhere in Australia. It is free on orders of $100 or more, and a flat $25 below that. Allow up to 7 working days in transit after dispatch within 2 working days.

This shop's own returns policy gives you 15 days from purchase to change your mind, on every product it sells. Send it back in its original packaging with proof of purchase and we refund the price you paid for the goods, processed within 24 to 48 hours of the return arriving. You cover the cost of returning it unless the item is faulty.

If it arrives faulty, damaged or not as described, we put it right at no cost to you under the Australian Consumer Law's consumer guarantees, return postage included.

Shipping details · Refunds and returns

Off-road and show use onlyNot for public roads in headlights designed for halogen globes. For a road car, choose the halogen globe in the same fitting.
Two Bulb SetShips as a matched pack of two so both sides can be changed together.
Fan Cooled ShellAluminium alloy body with a built-in cooling fan inside the bulb.
No External DriverNon-polarity plug and a compact body close in size to a halogen globe.

Swap tired halogen globes for crisp 6500K H4 LED headlight bulbs built for off-road, show and private property use.

Sold for off-road, show and private property use. A pack of two all-in-one high and low beam LED bulbs with an aluminium alloy shell, built-in cooling fan, IP65 rating and a plug-in design that needs no external driver.

For off-road, show and private property use only. In Australia, LED conversion bulbs are generally not permitted on public roads in headlights designed for halogen globes. For a road car, choose the halogen globe in the same fitting.

A pack of two H4 LED headlight bulbs that also suit the 9003 and HB2 fitting names, with high beam and low beam built into the one bulb.

Each bulb runs on 12 volts at 26 watts and produces a 6500 Kelvin cool white light.

The aluminium alloy shell carries a built-in cooling fan, and the assembly is IP65 rated against dust and water.

There is no separate driver box to mount, and the non-polarity plug can be connected either way around.

This set is sold for off-road, show and private property use, and is not for use on public roads in headlights designed for halogen globes.

H4 LED Headlight Bulbs (2 Pack, Off-Road Use)

This is a two bulb set of H4 LED headlight bulbs for vehicles and machines that use the H4 fitting, which is also sold under the names 9003 and HB2. Both filament positions are handled inside the one bulb, so a single unit covers high beam and low beam the way a standard H4 globe does. The set is sold for off-road, show and private property use. In Australia, fitting LED bulbs into headlights that were built for halogen globes is generally not permitted on public roads, so please plan the build accordingly.

H4 LED Headlight Bulbs (2 Pack, Off-Road Use)

Each bulb draws 26 watts on a 12 volt supply, giving 52 watts across the pair. The colour temperature is 6500 Kelvin, which reads as a cool white rather than the yellower tone of a halogen globe. That colour difference is the thing most people notice first when they look at the two side by side on a bench.

H4 LED Headlight Bulbs (2 Pack, Off-Road Use)

Heat is handled inside the bulb itself. The shell is aluminium alloy and a small fan sits in the body to move air across it while the bulb is running. Because the cooling is built in, there is no separate ballast or driver box that needs a mounting point behind the headlight, which keeps the install tidy in a crowded engine bay.

The assembly carries an IP65 ingress rating against dust and water, and the body is close in size to a halogen globe so it has a reasonable chance of clearing a standard dust cap. The plug is non-polarity, meaning it does not matter which way around the connector goes. Some vehicles will still show a bulb-out warning or a flicker once LED bulbs are fitted, and those vehicles may need a CANbus decoder or load resistors, which are not included with this set.

Fitment here is by fitting type only. If the housing takes an H4, 9003 or HB2 globe, the base will match, but you still need to check clearance behind the headlight for the fan body and the connector. Measuring the space before you order saves a lot of frustration later.

Not sure yet? That is fine.

You can change your mind. This shop's own returns policy gives you 15 days from purchase to send it back in its original packaging with proof of purchase, and we refund the price you paid for the goods.

If it turns up faulty, damaged or not as described, that is on us. The Australian Consumer Law covers you, we pay the return postage, and you can have a repair, a replacement or your money back. Read the full detail on our refunds and returns page, or ask us anything before you order.

Frequently Asked Questions

Can I use these on public roads?

No. This set is sold for off-road, show and private property use. In Australia, LED conversion bulbs are generally not permitted on public roads in headlights designed for halogen globes, and fitting them can make a vehicle unroadworthy. For a road car, choose the halogen globe in the same fitting, and check your state or territory rules if you are unsure.

What exactly is in this pack?

You get two H4 LED headlight bulbs. They are supplied as a matched pair so both sides of a vehicle can be changed at the same time. No decoder, load resistor or adaptor ring is included.

What does the H4 fitting mean?

H4 is a standard base and connector shape used by a huge number of headlight housings. The same fitting is also sold under the names 9003 and HB2, and all three refer to the same physical base.

Do these cover both high beam and low beam?

Yes. High beam and low beam are both built into the one bulb, which is how a standard H4 globe works too. Your existing switch and relay control which function is active.

What is the colour of the light?

The colour temperature is 6500 Kelvin, which looks like a cool white. Next to a halogen globe it reads as noticeably whiter and less yellow.

How much power do they draw?

Each bulb is rated at 26 watts on a 12 volt supply, so the pair draws 52 watts in total. That figure is from the product specification for this set.

Will these work on a 24 volt system?

The stated voltage is 12 volts. A 24 volt system is outside that rating, so these are not suitable for it without appropriate conversion equipment that we do not supply.

Is there a separate driver or ballast box?

No. The electronics are contained inside the bulb body, so there is nothing extra to find a mounting spot for. That is one of the main reasons people look for driverless led headlight bulbs.

How are these cooled?

The shell is aluminium alloy and there is a small fan built into the bulb body. The fan runs while the bulb is powered and moves air across the shell.

Can I hear the fan running?

Fan cooled led headlight bulbs do make a faint noise at close range when the housing is open. Inside a closed headlight with the vehicle running, most people do not notice it.

What does IP65 mean here?

IP65 is an ingress rating. The 6 covers dust protection and the 5 covers protection against water jets. It does not mean the bulb can be submerged.

Does the plug need to go on a particular way?

No. The connector is non-polarity, so it can be plugged in either orientation and will still work. That removes one of the usual trial-and-error steps during a halogen to led headlight upgrade.

Will these fit under my dust cap?

The bulb body is close in size to a halogen globe, which helps, but clearance varies between housings. Measure the depth behind the headlight before ordering, especially where a rubber boot or a tight cover is used.

Will my vehicle show a bulb warning light?

Some vehicles do. LED bulbs draw less current than halogen globes, and certain monitoring systems read that as a failed globe. Those vehicles may need a CANbus decoder or load resistors.

Are decoders or load resistors included?

No, they are not included with this set. If your vehicle flickers or throws a warning, you would need to source those separately to suit your wiring.

Why might the light flicker?

Flicker usually comes from a vehicle that pulses or monitors the headlight circuit.

Can I fit just one bulb?

You can, but we would not suggest it. Mixing one LED and one halogen gives two different light colours across the front of the vehicle, which looks odd and makes judging the output harder.

How long does fitting take?

For an easy housing with good access, many people manage it in around fifteen to twenty minutes per side. Tight engine bays, battery boxes and air intakes in the way can add considerably to that.

Do I need tools?

Usually very few. Most H4 housings use a wire retaining clip or a twist collar, and a small screwdriver plus clean gloves is often all that is needed. Some vehicles need a panel or an intake pipe moved first.

Should I touch the bulb body?

Handle the bulb by the metal base or the alloy shell. Avoid touching the LED chips or the lens surface, since oil and grit on those areas are hard to clean off safely.

What vehicles do these suit?

Fitment is by fitting type only. If the housing takes an H4, 9003 or HB2 globe and there is clearance for the bulb body, the base will match. We do not list specific vehicle models.

Can these be used in a motorcycle, tractor or work machine?

They can be used on machines with a 12 volt supply and an H4 fitting for off-road and private property work. Check clearance and check that your charging system is happy with the load.

Can I use them in driving lights or spotlights?

If the lamp uses an H4 base and runs on 12 volts, the bulb will physically fit. Fan clearance inside a small spotlight housing is the usual limiting factor, so measure first.

How do I clean them?

Wipe the shell with a dry soft cloth and keep the fan vents clear of dust and insects. Do not use solvents, and never clean a bulb that is still hot or still powered.

What if water gets into the headlight?

The bulb is IP65 rated, but the housing still needs to seal properly. Refit the grommet and the dust cap carefully and check that the cover clips home all the way round.

How heavy is the set?

The listed item weight is 230 g. That is light enough to post easily and it will not add any meaningful load to the headlight housing.

How long will delivery take?

We dispatch within 2 working days. Delivery then takes up to 7 working days by tracked courier, anywhere in Australia. It is free on orders of $100 or more and a flat $25 below that, shown in your cart before you pay. You get a tracking number by email once the parcel is dispatched.

What if the bulbs are not right for my build?

Get in touch with your order number and tell us what happened. If the set is unused and in its original packaging we will walk you through the return options, and if something arrived damaged or faulty we will sort a replacement or a refund.

Is there a warranty?

No separate warranty is sold. The Australian Consumer Law applies in full, and faulty items are put right. Contact us with your order number and a photo and we will sort it out.

Can I return it if it is not right for me?

Yes. You have 15 days from purchase to change your mind under our refunds and returns policy. Contact us first, keep the original packaging and leave the item unused until you are sure it suits.

The Buyer's Guide to H4 LED Headlight Bulbs

6 min read Online Auto Company

The problem with the old globe

Halogen headlight globes have a habit of fading quietly. They do not usually die in one dramatic pop. They get a bit dimmer each season, the light goes slightly browner, and one day you are squinting at a dirt track wondering when the lights got so tired. Pull a three year old globe out and hold it next to a fresh one and the difference is usually obvious.

That slow fade is the reason so many people start looking at LED. The H4 fitting is one of the most common bases out there, used on everything from older sedans to bikes, tractors and farm utes, so there is no shortage of options. This set is a pair of H4 LED headlight bulbs rated at 12 volts, 26 watts each, with a 6500 Kelvin cool white output.

One thing to be clear about before anything else. This set is sold for off-road, show and private property use. In Australia, putting LED bulbs into a headlight housing that was designed around a halogen globe is generally not permitted on public roads. If the vehicle is registered and driven on the road, this is not the product for it. If it is a paddock ute, a trail bike, a work machine, a show car or a project that lives on private land, read on.

How an LED conversion bulb actually works

A halogen globe makes light by heating a wire until it glows. An LED makes light by passing current through a semiconductor. The two behave very differently, and that difference drives most of the design choices you see in a conversion bulb.

The first difference is heat. A halogen globe throws its heat forward as infrared, out through the lens. An LED pushes its heat backwards into the base, which means something has to carry that heat away or the chips cook themselves. That is what the aluminium alloy shell and the built-in fan on this set are doing. The fan runs whenever the bulb is powered and keeps air moving across the body.

The second difference is current. An LED draws less current than the halogen globe it replaces. On a simple circuit nobody cares. On a vehicle that watches its headlight circuit for faults, that lower draw can read as a blown globe, which is where bulb warnings and flicker come from. Those vehicles may need a CANbus decoder or load resistors. They are not included here, and whether they fix a particular vehicle depends on how that vehicle is wired.

The third difference is packaging. Many older LED conversion sets used a separate driver box that had to be cable-tied somewhere behind the headlight. This set does not. Everything lives in the bulb body, and the plug is non-polarity, so it connects either way around without you having to flip it and try again.

Who this set suits

The honest answer is anyone with an H4, 9003 or HB2 housing on a 12 volt system, working off public roads. That covers a surprisingly wide spread of machines.

Farm and property vehicles are a big one. A ute that never leaves the gate, a tractor that works at dusk, a side-by-side on a large block. Those machines often still run original halogen globes that have been in there a decade.

Project and show cars are another. If a car is being built up and only sees a trailer and a display field, the cool white of a 6500K bulb suits that look. The same goes for a bike that only runs on a closed circuit or private land.

Who it does not suit is just as important. If your vehicle is registered and used on the road, stick with a quality halogen globe in a halogen housing. No amount of good intent changes the rules, and an off-road product used on a public road is a problem you do not need.

Checking fitment before you buy

Fitment for this product is by fitting type only. That means the base and connector are H4, which is the same as 9003 and HB2. It does not mean it fits every vehicle with that base, because bases are only half the story.

Here is what to check. First, confirm the globe you currently have is actually an H4. Pull it out and look at the base. H4 has three flat blades in a row and a round metal flange with three locating tabs. If it has two blades or a different flange, it is not H4.

Second, measure the clearance behind the headlight. LED bulbs with built-in fans are longer at the back than a halogen globe. This one is described as close in size to a halogen globe, which helps, but a tight rubber boot or a dust cap that sits right against the back of the housing can still cause trouble. Measure from the back of the housing to whatever sits behind it.

Third, think about the dust cap itself. Some caps have a deep dome and some are almost flat. A flat one is the usual sticking point. If you need a deeper cap or an extension boot, work that out before the bulbs arrive rather than at eight o'clock on a Sunday night.

Fourth, consider your electrical system. These are 12 volt bulbs. A 24 volt machine needs different equipment.

Fitting them without drama

Most H4 housings are straightforward. Switch everything off and let the old globe cool right down, because halogen globes stay hot for a surprisingly long time. Pop the dust cap, unplug the connector, release the wire clip or twist collar, and the old globe lifts out.

Handle the new bulb by the base or the alloy shell. Keep fingers off the LED chips and the lens area. Line up the locating tabs, seat it properly, and make sure the retaining clip clicks home. A bulb that is not fully seated will sit at an angle and the light will go everywhere except where you want it.

Plug the connector in. Because it is non-polarity, it does not matter which way it goes. Test both high and low beam before you put the cap back on, then refit the cap and check the seal all the way around. A headlight that fills with water is a bigger headache than a dim globe.

If a warning appears on the dash or the light flickers, that is the lower current draw being read as a fault. A decoder suited to your wiring is the usual answer, and it is not part of this kit.

Looking after them

There is not much to it. Keep the fan vents clear, because the fan is the part doing the work. Dust, chaff and dead insects collect in there on farm machines in particular, and a blocked fan means a hotter bulb.

Wipe the shell with a dry cloth when the bulb is cool and off. Skip solvents. If you pull the bulb out for any reason, put the dust cap and grommet back properly, since the IP65 rating on the bulb does not help you if the housing is open to the weather.

Check the retaining clip now and then on anything that works rough ground. Vibration can walk a clip loose over time, and a bulb that moves in the housing is a bulb that will not aim where you set it.

The short version

A pair of H4 LED headlight bulbs, 12 volts, 26 watts each, 6500 Kelvin cool white. Aluminium alloy shell, built-in fan, IP65 rated, no external driver, non-polarity plug. High and low beam in the one unit. Item weight 230 g.

Sold for off-road, show and private property use, not for use on public roads in headlights designed for halogen globes. Fitment is by base type, so check that you have an H4, 9003 or HB2 housing and measure the clearance behind it. Some vehicles will throw a bulb warning or flicker and may need a decoder, which is not included.

If the base matches, the space is there and the machine stays off public roads, this is a simple pair to fit and an easy change from a tired old globe.

Browse the shop

Not sure if the H4 base is yours?

Send us a photo of your current globe and the space behind the headlight, and we will tell you whether this pair is worth a try.

Ask us a question

Page summary

A pack of two H4 LED headlight bulbs, also matching the 9003 and HB2 fitting names, with high beam and low beam combined in each bulb. Rated at 12 volts and 26 watts per bulb, which is 52 watts for the set, with a colour temperature of 6500 Kelvin. The shell is aluminium alloy with a built-in cooling fan, the assembly is IP65 rated against dust and water, and there is no external driver box. The plug is non-polarity. Item weight is 230 g. Sold for off-road, show and private property use, not for public road use in halogen headlight housings. Some vehicles may need a CANbus decoder or load resistors, not included. Sold for off-road, show and private property use only; not for public roads in headlights designed for halogen globes.